The Complete Guide To Dremel 220: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Dremel 220 Information

The Dremel 220 Workstation is a 3-in-1 tool that combines a drill press, rotary tool holder, and Flex Shaft tool stand. It is the perfect solution for stationary projects using your Dremel rotary tool. With the 220 Workstation, you can drill perpendicular and angled holes in 15-degree increments, up to 90 degrees horizontal. You can also hold the tool horizontally, up to 90 degrees, for tasks such as polishing metal objects, sanding different shapes, and grinding metal pieces. The 220 Workstation also features an integrated Flex Shaft holder allowing telescopic adjustments to any height between 16 and 29 inches. This makes it easy to use the Flex Shaft for delicate tasks such as engraving or detail work.

Specifications

Feature	Specification
Power	120V
Speed	5,000-35,000 RPM
Chuck size	1/8"
Weight	6.6 lbs
Dimensions	15 x 10 x 10 inches

Features

• Articulating drill press: Drills perpendicular and angled holes in 15-degree increments, up to 90 degrees horizontal.
• Tool holder: Holds tool at 90 degrees horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal pieces.
• Flex Shaft tool stand: Allows telescopic adjustment between 16 and 29 In.
• Crow's nest: Provides on-board storage for drill bits, wrenches, and other Dremel accessories.
• Cord management clips: For safe storage of power cords.
• Inch and metric marking on base: For accurate drilling of workpiece.
• Depth markings with depth stop: For consistent depth adjustment.

What's in the box

• Dremel 220 Workstation
• Dremel rotary tool (4000 series)
• Drill bit assortment
• Sanding band assortment
• Flex Shaft (225)
• Wrenches
• Instruction manual

The Dremel 220 Workstation is a versatile and powerful tool that is perfect for a variety of projects. It is easy to use and has a number of features that make it ideal for stationary work. Whether you are a hobbyist or a professional, the 220 Workstation is a great addition to your tool collection.

Here are some additional tips for using the Dremel 220 Workstation:

• Always wear safety glasses when using the 220 Workstation.
• Make sure the workpiece is secure before starting work.
• Use the correct speed and accessories for the task at hand.
• Be careful not to overheat the workpiece.
• Take breaks often to avoid fatigue.

With proper care and use, the Dremel 220 Workstation will provide you with years of service.

Dremel 220 Compare with Similar Item

a comparison table of the Dremel 220 and two similar items: the Dremel 4000 and the Makita DTM50Z:

Feature	Dremel 220	Dremel 4000	Makita DTM50Z
Motor speed	5,000-35,000 RPM	5,000-35,000 RPM	5,000-35,000 RPM
Weight	1.25 pounds	2.1 pounds	1.5 pounds
Collet size	1/8 inch	1/8 inch	1/8 inch
Chuck type	Keyless	Keyless	Keyless
Vibration reduction	Yes	Yes	No
Dust collection	No	Yes	No
Work light	Yes	Yes	No
Price	$79.99	$149.99	$129.99

As you can see, the Dremel 220 and Dremel 4000 are very similar products. They have the same motor speed, weight, collet size, chuck type, and vibration reduction. The main difference is that the Dremel 4000 has a work light and dust collection system, which the Dremel 220 does not. The Dremel 4000 also costs more than the Dremel 220.

The Makita DTM50Z is a more affordable alternative to the Dremel 220 and Dremel 4000. It has the same motor speed, weight, collet size, chuck type, and vibration reduction as the Dremel 220, but it does not have a work light or dust collection system. The Makita DTM50Z also does not have a keyless chuck.

So, which one should you buy? If you need a rotary tool with a work light and dust collection system, the Dremel 4000 is a good option. However, if you are on a budget, the Makita DTM50Z is a great value. And if you don't need those features, the Dremel 220 is a great choice.

Here is a summary of the pros and cons of each product:

Dremel 220

Pros:

• Affordable
• Lightweight
• Compact
• Keyless chuck
• Vibration reduction
• Work light

Cons:

• No dust collection system

Dremel 4000

Pros:

• Powerful motor
• Work light
• Dust collection system
• Keyless chuck
• Vibration reduction

Cons:

• Heavier than the Dremel 220
• More expensive

Makita DTM50Z

Pros:

• Affordable
• Lightweight
• Compact
• Keyless chuck
• Vibration reduction

Cons:

• No work light
• No dust collection system
• Requires a key to tighten the chuck

I hope this comparison table helps you decide which rotary tool is right for you.

Dremel 220 Where To Buy

Here are some places where you can buy the Dremel 220 and spare parts:

• Dremel: Dremel's official website is a great place to buy the Dremel 220 and spare parts. You can be sure that you are getting genuine Dremel products, and you will also have access to the company's warranty and customer support.
• Walmart: Walmart is a large retailer that often has competitive prices on Dremel tools and accessories. You can also find a wide variety of spare parts at Walmart, including brushes, bits, and attachments.
• Amazon: Amazon is another great place to find Dremel tools and accessories. The prices on Amazon are often very competitive, and you can also find a wide variety of spare parts.
• Best Buy: Best Buy is a major electronics retailer that also sells Dremel tools and accessories. You can find the Dremel 220 at Best Buy, as well as a wide variety of spare parts.
• Lowes: Lowes is a home improvement retailer that also sells Dremel tools and accessories. You can find the Dremel 220 at Lowes, as well as a wide variety of spare parts.
• eBay: eBay is a great place to find used Dremel tools and accessories at a discount. You can also find some rare and hard-to-find spare parts on eBay.

I hope this helps!

Dremel 220 Problems and Solutions

The Dremel 220 is a versatile rotary tool that can be used for a variety of tasks, but it is not without its problems. Here are some common issues and solutions for the Dremel 220, as reported by experts:

• The motor overheats. This is a common problem with the Dremel 220, especially if it is used for extended periods of time or on high settings. To prevent the motor from overheating, take breaks every 15-20 minutes to let it cool down. You should also avoid using the Dremel 220 on high settings for extended periods of time.
• The tool jams. This can happen if the wrong type of accessory is used, or if the accessory is not properly tightened in place. To prevent the tool from jamming, make sure to use the correct type of accessory for the task at hand, and tighten all accessories securely.
• The trigger switch breaks. This is a relatively rare problem, but it can happen if the trigger switch is dropped or subjected to a lot of force. If the trigger switch breaks, you will need to replace it.
• The cord frays. This is another relatively rare problem, but it can happen if the cord is not properly cared for. To prevent the cord from fraying, avoid bending it sharply or getting it caught on anything. If the cord does fray, you will need to replace it.

In addition to these common problems, there are a few other hazards to be aware of when using a Dremel 220. First, the tool can create sparks, which could ignite flammable materials. Second, the tool can cause kickback, which is a sudden reaction to a pinched or snagged rotating wheel. Kickback can cause the tool to kick back towards the user, which can lead to serious injury. To avoid these hazards, always use the Dremel 220 in a safe environment and wear safety glasses.

Here are some additional tips for troubleshooting and preventing problems with your Dremel 220:

• Keep the tool clean and free of debris.
• Inspect the tool regularly for wear and tear.
• Replace worn or damaged parts immediately.
• Use the correct type of accessory for the task at hand.
• Tighten all accessories securely.
• Avoid using the tool on high settings for extended periods of time.
• Take breaks every 15-20 minutes to let the motor cool down.
• Use the tool in a safe environment.
• Wear safety glasses at all times.

By following these tips, you can help to ensure that your Dremel 220 will last for many years to come.

Dremel 220 Manual

Safety Information

• Read and understand all instructions before using the Dremel 220 Workstation.
• Always wear safety glasses when using the Workstation.
• Keep your work area clean and well-lit.
• Do not use the Workstation in wet or damp conditions.
• Do not use the Workstation near flammable materials.
• Make sure the Workstation is properly grounded.
• Do not overload the Workstation.
• Do not use the Workstation for any purpose other than its intended use.
• Keep children and pets away from the Workstation.

Before Use

• Make sure the Workstation is properly assembled and that all nuts and bolts are tightened.
• Check the power cord for any damage. If the power cord is damaged, do not use the Workstation.
• Attach the desired Dremel rotary tool to the Workstation.
• Select the appropriate speed and bit for your project.

Troubleshooting

• If the Workstation is not working properly, check the following:
  • Is the Workstation plugged in?
  • Is the power switch turned on?
  • Is the bit properly inserted into the Dremel rotary tool?
  • Is the correct speed selected?
  • Is the bit dull or damaged?
• If you still cannot resolve the problem, contact Dremel customer service for assistance.

Maintenance

• Keep the Workstation clean and free of dust and debris.
• Wipe down the Workstation with a damp cloth after each use.
• Lubricate the Workstation with a light oil every few months.
• Replace the power cord if it is damaged.

Warranty

The Dremel 220 Workstation is warranted to be free from defects in materials and workmanship for one year from the date of purchase. If the Workstation fails during the warranty period, it will be repaired or replaced at no charge.

Contact Information

Dremel Customer Service 1-800-437-3757 [email protected] www.dremel.com

Additional Information

• The Dremel 220 Workstation can be used with a variety of Dremel rotary tools.
• The Workstation can be used for a variety of tasks, including drilling, sanding, polishing, and grinding.
• The Workstation is a versatile tool that can be used for a variety of projects around the home and workshop.

I hope this manual has been helpful. Please contact Dremel customer service if you have any further questions.